? semiconductor components industries, llc, 2013 september, 2013 ? rev. 6 1 publication order number: MJ21193/d MJ21193-pnp mj21194-npn silicon power transistors the MJ21193 (pnp) and mj21194 (npn) utilize perforated emitter technology and are specifically designed for high power audio output, disk head positioners and linear applications. features ? total harmonic distortion characterized ? high dc current gain ? excellent gain linearity ? high soa ? these devices are pb ? free and are rohs compliant* maximum ratings rating symbol value unit collector ? emitter voltage v ceo 250 vdc collector ? base voltage v cbo 400 vdc emitter ? base voltage v ebo 5 vdc collector ? emitter voltage ? 1.5 v v cex 400 vdc collector current ? continuous i c 16 adc collector current ? peak (note 1) i cm 30 adc base current ? continuous i b 5 adc total power dissipation @ t c = 25 c derate above 25 c p d 250 1.43 w w/ c operating and storage junction temperature range t j , t stg ? 65 to +200 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. pulse test: pulse width = 5 s, duty cycle 10%. (continued) thermal characteristics characteristic symbol max unit thermal resistance, junction ? to ? case r jc 0.7 c/w *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. http://onsemi.com marking diagram to ? 204aa (to ? 3) case 1 ? 07 style 1 16 amp complementary silicon power transistors 250 volts, 250 watts device package shipping ? ordering information MJ21193g to ? 3 (pb ? free) 100 units / tray mj21194g to ? 3 (pb ? free) 100 units / tray ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specifications brochure, brd8011/d. mj2119xg ayyww mex mj2119x = device code x = 3 or 4 g=pb ? free package a = assembly location yy = year ww = work week mex = country of origin schematic 1 base emitter 2 case 3 1 base emitter 2 case 3 pnp npn 1 2 3
MJ21193 ? pnp mj21194 ? npn http://onsemi.com 2 electrical characteristics (t c = 25 c unless otherwise noted) characteristic symbol min typ max unit off characteristics collector ? emitter sustaining voltage (i c = 100 madc, i b = 0) v ceo(sus) 250 ? ? vdc collector cutoff current (v ce = 200 vdc, i b = 0) i ceo ? ? 100 adc emitter cutoff current (v ce = 5 vdc, i c = 0) i ebo ? ? 100 adc collector cutoff current (v ce = 250 vdc, v be(off) = 1.5 vdc) i cex ? 100 adc second breakdown second breakdown collector current with base forward biased (v ce = 50 vdc, t = 1 s (non ? repetitive) (v ce = 80 vdc, t = 1 s (non ? repetitive) i s/b 5 2.5 ? ? ? ? adc on characteristics dc current gain (i c = 8 adc, v ce = 5 vdc) (i c = 16 adc, i b = 5 adc) h fe 25 8 ? ? 75 base ? emitter on voltage (i c = 8 adc, v ce = 5 vdc) v be(on) ? ? 2.2 vdc collector ? emitter saturation voltage (i c = 8 adc, i b = 0.8 adc) (i c = 16 adc, i b = 3.2 adc) v ce(sat) ? ? ? ? 1.4 4 vdc dynamic characteristics total harmonic distortion at the output v rms = 28.3 v, f = 1 khz, p load = 100 w rms h fe unmatched (matched pair h fe = 50 @ 5 a/5 v) h fe matched t hd ? ? 0.8 0.08 ? ? % current gain bandwidth product (i c = 1 adc, v ce = 10 vdc, f test = 1 mhz) f t 4 ? ? mhz output capacitance (v cb = 10 vdc, i e = 0, f test = 1 mhz) c ob ? ? 500 pf note: pulse test: pulse width = 300 s, duty cycle 2% i c collector current (amps) figure 1. typical current gain bandwidth product figure 2. typical current gain bandwidth product f, current gain bandwidth product (mhz) t pnp MJ21193 f, current gain bandwidth product (mhz) t npn mj21194 i c collector current (amps) 0.1 1.0 10 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 8.0 7.0 6.0 4.0 3.0 5.0 1.0 0 2.0 0.1 1.0 10 v ce = 10 v 5 v t j = 25 c f test = 1 mhz v ce = 5 v 10 v t j = 25 c f test = 1 mhz
MJ21193 ? pnp mj21194 ? npn http://onsemi.com 3 figure 3. dc current gain, v ce = 20 v figure 4. dc current gain, v ce = 20 v figure 5. dc current gain, v ce = 5 v figure 6. dc current gain, v ce = 5 v h fe , dc current gain i c collector current (amps) i c collector current (amps) h fe , dc current gain h fe , dc current gain i c collector current (amps) i c collector current (amps) v ce , collector-emitter voltage (volts) figure 7. typical output characteristics i c , collector current (a) v ce , collector-emitter voltage (volts) figure 8. typical output characteristics i c , collector current (a) pnp MJ21193 npn mj21194 h fe , dc current gain typical characteristics pnp MJ21193 pnp MJ21193 npn mj21194 npn mj21194 1000 100 10 100 10 1.0 0.1 t j = 100 c 25 c -25 c v ce = 20 v 1000 100 10 100 10 1.0 0.1 t j = 100 c 25 c -25 c v ce = 20 v 1000 100 10 100 10 1.0 0.1 1000 100 10 100 10 1.0 0.1 t j = 100 c 25 c -25 c v ce = 5 v t j = 100 c 25 c -25 c v ce = 20 v 30 25 20 15 10 5.0 0 5.0 010152025 35 30 25 20 15 10 0 5.0 010152025 5.0 1.5 a 1 a 0.5 a i b = 2 a t j = 25 c i b = 2 a 1.5 a 1 a 0.5 a t j = 25 c
MJ21193 ? pnp mj21194 ? npn http://onsemi.com 4 figure 9. typical saturation voltages i c , collector current (amps) saturation voltage (volts) figure 10. typical saturation voltages i c , collector current (amps) saturation voltage (volts) figure 11. typical base ? emitter voltage i c , collector current (amps) v be(on) , base-emitter voltage (volts) figure 12. typical base ? emitter voltage i c , collector current (amps) v be(on) , base-emitter voltage (volts) figure 13. active region safe operating area v ce , collector-emitter voltage (volts) i c , collector current (amps) there are two limitations on the power handling ability of a transistor; average junction temperature and secondary breakdown. safe operating area curves indicate i c ? v ce lim- its of the transistor that must be observed for reliable opera- tion; i.e., the transistor must not be subjected to greater dissip- ation than the curves indicate. the data of figure 13 is based on t j(pk) = 200 c; t c is vari- able depending on conditions. at high case temperatures, thermal limitations will reduce the power than can be handled to values less than the limitations imposed by second break- down. pnp MJ21193 npn mj21194 typical characteristics pnp MJ21193 npn mj21194 3.0 2.5 2.0 1.5 1.0 0.5 0 100 10 1.0 0.1 1.4 1.2 1.0 0.8 0.6 0.4 0 100 10 1.0 0.1 0.2 10 1.0 0.1 100 10 1.0 0.1 10 1.0 0.1 100 10 1.0 0.1 100 10 1.0 0.1 100 10 1.0 1000 t j = 25 c i c /i b = 10 v be(sat) v ce(sat) t j = 25 c i c /i b = 10 v be(sat) v ce(sat) t j = 25 c v ce = 20 v (solid) v ce = 5 v (dashed) t j = 25 c v ce = 20 v (solid) v ce = 5 v (dashed) 1 sec t c = 25 c
MJ21193 ? pnp mj21194 ? npn http://onsemi.com 5 figure 14. MJ21193 typical capacitance v r , reverse voltage (volts) c, capacitance (pf) figure 15. mj21194 typical capacitance v r , reverse voltage (volts) c, capacitance (pf) audio precision model one plus total harmonic distortion analyzer source amplifier 50 0.5 0.5 8.0 -50 v dut dut +50 v figure 16. typical total harmonic distortion figure 17. total harmonic distortion test circuit frequency (hz) t hd , total harmonic distortion (%) 10000 1000 100 100 10 1.0 0.1 10000 1000 100 100 10 1.0 0.1 1.2 1.1 1.0 0.9 0.8 0.7 0.6 100000 10000 1000 100 10 t j = 25 c t j = 25 c c ib c ob c ib c ob f (test) = 1 mhz f (test) = 1 mhz
MJ21193 ? pnp mj21194 ? npn http://onsemi.com 6 package dimensions notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. all rules and notes associated with referenced to-204aa outline shall apply. style 1: pin 1. base 2. emitter case: collector dim min max min max millimeters inches a 1.550 ref 39.37 ref b --- 1.050 --- 26.67 c 0.250 0.335 6.35 8.51 d 0.038 0.043 0.97 1.09 e 0.055 0.070 1.40 1.77 g 0.430 bsc 10.92 bsc h 0.215 bsc 5.46 bsc k 0.440 0.480 11.18 12.19 l 0.665 bsc 16.89 bsc n --- 0.830 --- 21.08 q 0.151 0.165 3.84 4.19 u 1.187 bsc 30.15 bsc v 0.131 0.188 3.33 4.77 a n e c k ? t ? seating plane 2 pl d m q m 0.13 (0.005) y m t m y m 0.13 (0.005) t ? q ? ? y ? 2 1 u l g b v h to ? 204aa (to ? 3) case 1 ? 07 issue z on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other intellectual property. a list ing of scillc?s product/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent ? marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parame ters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 MJ21193/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
